All three primaries, or any dark color and its opposite, pushed until almost no light comes back.
Red, yellow and blue make black, or something very close to it. Mixed in the right amounts, the three primary colors of paint absorb nearly all the light that falls on them, and what little comes back looks black.1
Two paints can do it as well, if they are dark and sit opposite each other on the color wheel: a deep blue with a brown, or a deep red with a dark green. Each pair holds all three primaries between them.2
Printers have a black ink because their three colors together only reach a dark, muddy brown.3 On a screen black is not mixed at all. It is what you see when the lights are off.1
| Three colors | Red + yellow + blue |
|---|---|
| Two colors | Blue + brown, or red + green |
| Cooler | More blue |
| Warmer | More red or brown |
| In print | Black ink, often over other inks |
| On a screen | No light at all: #000000 |
Paint swatches are worked out with a pigment model, not measured from real paint. Real tubes differ from brand to brand. The model’s darkest mixes stop at a deep charcoal; real paints, used thickly, go darker.
Mix a dark purple, with more blue than red. These are the two darkest primaries, so they do most of the work.
Yellow is purple’s opposite. Each touch takes away some of the purple until the mix has no clear color left.
Looks brown? Add blue. Looks green? Add red. Looks purple? Add yellow. Test it by spreading a little thinly or mixing a bit with white, which shows the hidden color.
The same three paints in equal amounts make brown. Black needs the balance tipped toward blue, the darkest of the three, with only enough yellow to cancel the purple.
Two dark, strong paints that are opposites. The mix is close to neutral.
A cool black. More brown warms it; equal amounts give a soft, neutral dark.
A little deep blue cools the red and green mix and darkens it further.
These pairs are complementary colors: opposites on the wheel. Mixed, they cancel each other’s color and leave a dark neutral.2 Any mixture of paints is darker and duller than its parts, so the darker the two paints you start from, the closer the result comes to black.4
Light, bright paints will not get there. Yellow and purple are opposites too, but yellow is so light that the mix stops at brown.
Black paints are among the oldest there are. Charcoal drew the black lines of cave art; lamp black is soot, and ivory black was made by charring bone.1 A black from the tube is darker and more even than anything mixed.
A mixed black always leans a little toward one of its parts, which can be an advantage: a bluish black for a night sky, a brownish one for hair or shadow. Painters have long argued over which is better. Renoir said he had tried to replace black with a mixture of red and blue, and with cobalt blue or ultramarine, but always came back to ivory black, which he called the queen of colors.1
| To get | Add to your black | Named blacks and near-blacks |
|---|---|---|
| Cool, bluish black | Blue | Obsidian, Payne’s gray, midnight blue |
| Warm, brownish black | Brown or red | Ebony, wenge, oxblood |
| Soft black | A touch of white | Charcoal, onyx, graphite |
| Deepest black | Nothing: use a black pigment | Jet black, lamp black, Vantablack |
White turns black into gray straight away, and shows which way the black leans: a mixed black with too much blue gives a blue-gray, one with too much red a mauve-gray. That makes a dab of white the quickest test of a mixed black.
With ideal inks the three absorb all light. Real inks give a dark, muddy brown instead.
In theory a printer’s three colored inks make black when all three overlap. In practice the inks are not pure enough, and the overlap comes out as an imperfect, brownish black. That is why four-color printing adds a fourth ink: the K in CMYK is black.3
For large dark areas printers go one step further and print black over the colors. This is called rich black: a typical mixture is full black with half-strength cyan, magenta and yellow under it, which absorbs more light than black ink alone.5
Black is the color seen when no visible light reaches the eye.1 A screen makes it by leaving a pixel’s red, green and blue lights switched off, which is the code #000000.
No mixture of lights can make black, because every light added makes the result brighter. Mixing all the lights gives white, the opposite of what mixing all the paints gives. See the color mixing chart for the two side by side.
A deep blue and a brown, or a deep red and a dark green. Each pair is a color and its opposite, so together they absorb almost all light.
Red, yellow and blue. Use mostly blue, less red and only a little yellow; equal amounts give brown.
Mix the darkest blue you have with a dark brown, and adjust: more blue if it looks brown, more brown if it looks blue.
One primary is missing or too weak. Brown needs more blue, purple needs more yellow, and green needs more red.
With paint it makes a dark brown or a near-black, depending on the amounts. With light it makes white.
Red, blue and yellow food coloring together, or red, blue and green. Starting from chocolate icing takes far less coloring than starting from white.
In light, black is the absence of color: no light, no color. In paint it is a color like any other, sold as a pigment and mixed like one.
All three primary colors together. Or, put another way, any color mixed with its opposite.
What colors make blue?Nothing, if you ask a paintbox. Cyan and magenta, if you ask a printer.
Primary colorsThree colors that mix into the rest. Which three depends on whether you mix paint, light or ink.
Color mixing chartEvery pair of the basic paints, lights and inks, and what each pair makes.