The vivid orange that means WARNING, defined by an American standard as Munsell 5YR 6/15.
Overview
Safety orange is the vivid orange of warning signs, machine hazards and road work. Its usual web code is #FF7900: red at full strength, green at a little under half and no blue. That makes it almost a twin of pumpkin, and clearly yellower than international orange.
Unlike most named colors, it is set by a standard. ANSI Z535.1, the American standard for safety colors, gives safety orange as Munsell 5YR 6/15: a yellow-red hue, a lightness of 6 on a scale of 10 and a very high chroma of 15, pinned down with CIE color coordinates. That orange is so intense that it sits just outside what a standard screen can show. The nearest screen color is about #E87600, a little darker than the web code.
In the ANSI system each safety color has a job: red for DANGER, orange for WARNING, yellow for CAUTION. Orange also marks the parts of machines that can cut or crush. On American roads, orange has been the color of work zones since 1971, which is why cones and barrels are orange. Road crews’ vests and hunters’ jackets use brighter fluorescent oranges. The names often get mixed up, but in the rules, hunter orange is a different color.
On screens, safety orange is bright and warm. Black text reads very well on it (about 8:1). White text reaches only about 2.6:1, too little even for large type, so use a darker shade when you need white lettering.
HEX
#FF7900
RGB
rgb(255, 121, 0)
HSL
hsl(28, 100%, 50%)
HSV
28°, 100%, 100%
CMYK
0, 53, 100, 0
OKLCH
oklch(72.2% 0.190 50.2)
Every code converts from the HEX value #FF7900. #FF7900 is the code Wikipedia lists for safety orange, citing ANSI Z535, but the standard itself gives no hex. It defines safety orange as Munsell 5YR 6/15 (Munsell Color), which the 1998 edition gives as CIE x 0.5510, y 0.4214 and luminance factor 30.05%, the same numbers the US hazardous-materials label rules use for orange. That point lies just outside sRGB; the nearest screen color is about #E87600, so the web code is a lighter stand-in. Federal Standard 595C chip 12300, listed as OSHA safety orange in Aubrey Jaffer’s transcription, converts to almost the same, about #E97600. CMYK is a screen-based estimate; print results vary.
Safety orange on the color map
LighterDarker
The ANSI value, shown at the nearest color a screen can display, sits just below the reference and a hair to the right: darker and very slightly yellower. People’s average plain orange in the xkcd survey sits almost on top of the reference, a touch darker. The federal chip listed as highway orange lies lower and a little to the left, near the bottom edge of the outline: darker and redder. The outline is an approximate range, not a measured one.
Shades and tints
Tintswith white
Shadeswith black
Toneswith gray
Safety orange sits in the middle. Tints add white, shades add black and tones add gray, in 10% steps out from it. Tap any swatch to copy its code.
Light and dark safety orange
#FFC999
Pale safety orangeMixed 60% with white. A soft apricot for backgrounds.
#FFAF66
Light safety orangeMixed 40% with white. A warm melon.
#FF7900
Safety orangeThe reference color.
#E87600
ANSI safety orangeThe standard’s Munsell 5YR 6/15 at the nearest point a screen can show. A little darker; black text reads well on it (about 7:1).
#FF6A13
Hunter orangeRedder: the usual web code for the fluorescent orange hunters wear. It has a page of its own. See hunter orange
#994900
Dark safety orangeMixed 40% with black. A deep rust that holds white text (about 6.4:1).
Colors that go with safety orange
Pairings that work in rooms, outfits and interfaces.
Warning sign
The ANSI WARNING panel: black letters on safety orange, above a white message area.
Work zone
Cone orange, white reflective bands and asphalt gray. Keep any text on the orange black.
Machine shop
Charcoal machinery with orange edges, the way ANSI suggests marking dangerous parts.
Safety orange and navy
Hot against cool. Navy carries the text and calms the orange.
Orange against the sky
Orange and sky blue are near opposites, which is why orange stands out so well outdoors.
Apricot to rust
One hue from pale to dark. Warm, graphic and easy to keep legible.
Color-wheel palettes
Pick a palette to see where its colors sit on the color wheel. The caret marks safety orange. Tap a band to copy its code.
Lined up by hue around safety orange. Hover a color to see how similar it is.The bar under each name shows how similar it is. Similarity comes from the distance between the two colors in OKLab, a model of how we see color.
Safety orange vs hunter orange
Safety orange#FF7900 · hue 28°
Yellower and a little lighter
An ANSI color for signs and machine hazards
Defined as Munsell 5YR 6/15
Hunter orange#FF6A13 · hue 22°
Redder
A fluorescent orange named in hunting laws
Worn so other hunters can see you
Meaning
WARNING signs
Machine hazards
Work zones
Defined by numbers
Safety orange is a color with a job. In the US it is a standard warning color: it fills the WARNING panel on safety signs, marks the parts of machines that can cut or crush, and colors the cones and barrels of road work. Studies of color and emotion test basic words like “orange”, not safety orange, so the claims here are about rules and standards, not mood.
Defined by a Munsell notation
Standard
ANSI Z535.1 does not define safety orange by a sample’s name but by numbers: Munsell 5YR 6/15, with matching CIE coordinates. The color charts that federal inspectors use to check the orange on hazardous-materials labels are centered on exactly the same numbers.1, 2
Orange means WARNING
Standard
The ANSI sign system grades hazards by color. For product labels, ANSI Z535.4 says “The word WARNING shall be in safety black letters on a safety orange background”, between white on red for DANGER and black on yellow for CAUTION. The chair of the Z535.1 subcommittee says the orange “has to look like orange”, not yellowish or reddish, so that it is never mistaken for caution yellow or danger red.3
For the dangerous parts of machines
Official guidance
Answering questions about color-coding machinery in 2003, OSHA quoted the ANSI rule: if a color is used to identify the hazardous parts of machines, safety orange shall be used, for example on the exposed edges of pulleys, gears, rollers and cutting devices. OSHA added that the ANSI standard is a guideline. Its own color code names only red, for danger and stop, and yellow, for caution.4, 5
Orange means road work
Federal standard
The US traffic manual assigns orange to temporary traffic control, and says cones “shall be predominantly orange”. It allows a fluorescent orange in place of standard orange, because the fluorescent version is easier to see, especially at twilight.6
Hunter orange is a different rule
State law
Hunting laws ask for a fluorescent color, not ANSI’s orange. Montana, for example, defines hunter orange as “a daylight fluorescent orange color” and requires big-game hunters to wear at least 400 square inches of it above the waist.7
Earley, E. (2023, July 1). “ANSI Z535.1 – Safety Colors in Focus”. In Compliance Magazine, quoting ANSI Z535.4 and Angela Lambert, chair of the ANSI Z535.1 subcommittee.
Safety orange grew out of two American systems: the safety color code that began as a wartime standard in 1945, and the traffic manual that made orange the color of road work in 1971.
February 17, 1941
Charles D. Scanlon, a painter for the Los Angeles street department, applies for a patent on a traffic marker: a hollow cone made from the fabric of old car tires, which springs back when struck. The patent, granted on November 2, 1943, says the cone’s only purpose is “to present a large visible area”. It names no color.1, 2
1945
At the War Department’s request, the American Standards Association approves an American War Standard containing a “Safety Color Code”. It is the ancestor of today’s ANSI Z535.1.3
1971
A completely rewritten fifth edition of the Manual on Uniform Traffic Control Devices designates orange for construction signs on American roads.4
1979
ANSI’s Z53 committee on safety colors merges with its Z35 committee on safety signs to form the Z535 Committee on Safety Signs and Colors.5
2002
A major revision of ANSI Z535.1 drops the rules on where to use each color, leaving the standard to define the safety colors themselves and their tolerances.3
August 19, 2003
Asked whether pulley rims must be painted orange, OSHA replies that ANSI does not require it: the standard only says that if a color marks the hazardous parts of machines, it shall be safety orange.6
June 13, 2013
OSHA updates its sign rules so that employers may follow ANSI Z535.1-2006 (reaffirmed 2011) for safety colors, alongside the older Z53.1-1967.7
2022
ANSI Z535.1 is republished, the tenth revision since the 1945 war standard.3
December 2023
The 11th edition of the traffic manual keeps orange for work zones: cones “shall be predominantly orange”, and a fluorescent orange may stand in wherever orange is required.8
Sources (8)
Scanlon, C. D. US Patent 2,333,273, filed February 17, 1941, issued November 2, 1943. Google Patents.
American safety signs and product labels put the word WARNING in black on a safety orange panel. The standard defines the orange as Munsell 5YR 6/15, about #E87600 at the nearest point a screen can show, and safety black as Munsell N 1.5, about #262626.
#E87600#262626
Source: ANSI Z535 / Munsell
Source
The panel rule is ANSI Z535.4, section 7.2.2, as quoted in In Compliance Magazine. The Munsell notations come from Munsell Color’s ANSI safety color sheets. #E87600 is Wikipedia’s nearest sRGB point for the standard’s CIE values and #262626 is our conversion of N 1.5; the orange lies just outside what sRGB can show, so read the codes as close, not exact.
#E87600
Hazard labelUS explosives labels
Federal hazardous-materials rules say the background of every EXPLOSIVE label, divisions 1.1 to 1.6, must be orange. The color charts used to check labels center that orange on Munsell 5.0YR 6.0/15, the same numbers as ANSI’s safety orange: about #E87600 on screen.
#E87600
Source: 49 CFR Part 172
Source
The orange background is required by 49 CFR 172.411, and the color tolerance charts are specified in Appendix A to Part 172, table 1 (x .5510, y .4214, Y 30.05). That point lies just outside sRGB; #E87600 is the nearest screen color, so read it as close, not exact.
#FF7900#FFFFFF
BrandingOrange
Orange’s logo square is #FF7900, the same code as this page. The French telecom company puts its name in white on that orange square.
#FF7900#FFFFFF
Source: Orange logo file
Source
The orange is the color of the logo file on Orange’s newsroom. The logo shown is that file.
Logos belong to their owners and are shown unaltered, only to show where each palette comes from. Palettes are sampled in-house.
Questions
What color is safety orange?
A vivid orange used for warnings. Its usual web code is #FF7900 (RGB 255, 121, 0). The ANSI standard defines it as Munsell 5YR 6/15, which on screen is a little darker, about #E87600.
Who defines safety orange?
ANSI Z535.1, the American standard for safety colors, published by the National Electrical Manufacturers Association. It gives safety orange as a Munsell notation with CIE color coordinates, not as a hex code.
What does safety orange mean on a sign?
WARNING. In the ANSI sign system, red means DANGER, orange means WARNING and yellow means CAUTION. A WARNING panel has black letters on safety orange.
Does OSHA require safety orange?
Not directly. OSHA’s own color code names only red, for danger and stop, and yellow, for caution. Its sign rules accept the ANSI standards, which say that if a color marks the dangerous parts of machines it should be safety orange, but OSHA calls that a guideline.
Why are traffic cones orange?
Because the US traffic manual makes orange the color of temporary traffic control. Orange was designated for construction signs in 1971, and today’s manual says cones shall be predominantly orange.
Is safety orange the same as hunter orange?
No, though the names are often mixed up. Hunter orange is a fluorescent orange that hunting laws require, and its usual web code, #FF6A13, is redder. Safety orange is the ANSI warning color for signs and machines, #FF7900 on screens.
Is the orange on high-visibility vests safety orange?
Not quite. Vests for road workers follow ANSI/ISEA 107, which calls for fluorescent orange-red, fluorescent yellow-green or a mix of the two. Fluorescent colors stand out more than a standard orange, especially at dusk.
Can a screen show true safety orange?
Almost. The standard’s CIE values lie just outside the sRGB range most screens use, and the nearest color a screen can show is about #E87600. The common code #FF7900 is a lighter, brighter stand-in.